How To Clean Between Car Seats? Complete Guide

how to clean between car seats

A car seat’s center console gap is extremely small and challenging to keep clean. Between the driver’s seat and the front passenger seat in a car, there is a control-bearing surface known as the center console.

You can effectively clean the spaces between your car seat and center console if you have the right tools or remove the seats from the vehicle. Start by removing all of the storage there.

Use a crevice tool and a vacuum cleaner to remove all the dirt after the trash has been removed. You’ll need a steam cleaner, compressed air, and a fine-toothed brush for deeper cleaning.

Read on to learn how to effectively clean in between car seats.

What You Will Need to Follow This Tutorial

Socket Set

To clean and vacuum in between the car seats, one of the steps would be to remove the seats. Since car seats are frequently fastened with Torx or hex bolts, you would need a socket set to do this.

Vacuum Cleaner

You would need to vacuum between car seats and the surfaces surrounding them due to the dirt and debris that collect and become stuck.

Crevice Tool

This is a necessary cleaning tool to reach difficult-to-reach areas and get rid of dirt on folds and crevices between the console and the car seat.

Handheld Brush

When cleaning and vacuuming inaccessible areas of the car, such as the spaces between the seats, a handheld brush would be useful.

Upholstery Cleaner

Dirt that has become lodged in folds and crevices could be removed with this.

Microfiber Cloth

It would be required to remove dirt and upholstery cleaner.

Detailing Brush Or Paintbrush

Use either to remove dirt from the car seat rails’ hard-to-reach areas.

WD-40 White Lithium Grease

Lubricating the car seat rails is also crucial. The rails will receive constant lubrication from this product.

Step-by-step Guide

Step 1: Remove the Junk Between the Car Seats

Frequently, trash would land between the car seats and the console, along with old receipts, change, food wrappers, air fresheners, and air freshener bottles. You should clean out these items first. Nothing will obstruct your path when you first try to fit items between car seats if you do it this way.

Step 2: Remove Carpets

The front and back carpets should be removed as well. You can then clean the dirt off the car’s floor using this method.

Step 3: Remove Or Move the Car Seats

In order to make cleaning easier and more thorough, the next step is to remove the car seats. You can either move the seats or get rid of them all to accomplish this.

Typically, the majority of contemporary automobile models feature rail-based seat movement. You now have the option to either move them or get rid of them. We have to remove the seats because older automobile models frequently lack movable seats.

You would unplug the wires from under the car seat after loosening the bolts. To make it easier to access the electrical harnesses, slightly recline the seat. You can finally remove the seats from the car after the bolts are undone and the wires are cut.

Step 4: Vacuum and Sweep Around the Console and Car Seats

A vacuum with a crevice tool attached can be used to thoroughly clean the area around the front seats of the vehicle. The best way to clean between car seats, whether you’re cleaning with the seats removed or just moving them, is with a crevice tool because of its thin, narrow, long shape.

Vacuum both the console and the sides of the seats and the console. Then, using a handheld bristle brush, you would sweep the carpet beneath the seat to remove the debris so you could also reach between the center console and the car seat. Vacuuming would be much simpler if you first swept.

In the following step, vacuum the loose dirt by using the crevice tool once more. To remove the difficult-to-remove dirt, you can simultaneously vacuum and brush.

Step 5: Clean the Crevices and Folds

Car seats frequently accumulate dirt, dust, crumbs, and hair because of their small crevices and folds. Cleaning the folds and crevices of the seats would be a good idea since you’re already cleaning the area around your front seats.

First, without using any attachments, vacuum the seat’s bottom and backrest. This will remove any loose dirt from the surface and stop it from sliding into the folds and crevices when the cleaning is complete.

Following your work with the loose dirt, begin vacuuming the seat seams by attaching the crevice tool to your vacuum. To remove the accumulated dirt, you might also need to pry open the seams with your fingers. And since some dirt frequently gets hidden there, you should pay particular attention to where the backrest and the bottom of the seat meet.

Apply upholstery cleaner and scrub any remaining dirt with a brush to loosen it up if it is in the folds and crevices. After that, use a microfiber cloth to remove the moisture and dirt.

Step 6: Clean the Car Seat Rails

Start with the back portion of the rails. Vacuum the rails as you move the seat forward while using the crevice tool. Do it gently to prevent sucking out the lubricant on the rails that enable the seat to move smoothly on the rails.

Using a detailing brush or small paintbrush, remove the dirt and debris from tight crevices. The brushed-out dirt can be picked up right away by combining it with vacuuming using the crevice tool.

Push the seat backward and begin cleaning the front portion of the rails after you have finished cleaning the back portion. Some dirt may come loose when you do this, though. The rails can’t really be cleaned completely because they can’t be avoided.

Additionally, you might want to lubricate the rails. Since it can produce lasting results, WD-40 White Lithium Grease comes highly recommended.

Step 7: Clean the Back Car Seats

You can do either:

• The back car seats must be removed for a thorough cleaning. You can remove the accumulated dirt particles from under car seats by performing a deep clean.
• A much easier option would be to vacuum the folds and crevices in the back seats. Cleaning without removing the back seats, however, would be perfectly fine if you are concerned or believe that it is not necessary.

The method for removing the back seats would vary because every car is built differently. Some cars make it simple to remove the back seats without the need for any tools, while others call for removing a few bolts or unlatching the bench clips from the floor. It may occasionally also be necessary to disconnect some wires in powered back seats.

You can clean the back seats in the same manner as the front seats if you don’t want to go through the trouble of taking out the back seats. Simply carry out steps four and five from the list above.

Clean Car Seat Folds and Crevices

Most of the time, in an effort to clean car seats, people only lightly brush them with a piece of cloth.

That is acceptable as long as you regularly clean the car upholstery and take precautions to keep them clean. If not, there will likely be a lot of dirt in the crevices.

Folds in car seats can be challenging to clean and are known to attract a lot of dirt. You have to work hard to clean the tight folds.

Step 1
The seats should be thoroughly vacuumed after any attachments have been removed. By doing this, you’ll clean up a lot of dirt and cover a lot of ground.

Step 2
After that, use your hands to pry open the seams and your crevice tool to work your way around them. When doing this, you’ll need to exert some pressure, especially where the seat’s bottom and back meet.

Step 3
Find the areas that still have dirt in them, then use an interior detailing brush to agitate the folds.

Step 4
After that, use a microfiber cloth to remove all of the dirt. Vacuum the car seat once more after you’re done.

Perhaps you don’t have a detailing brush. In this instance, a can of compressed air can be used to blow out dirt. That will also work, and you can clean up challenging areas.

How to Clean Car Back Seats

Cleaning your front seats and center console can be challenging, but you won’t have to go through that trouble with your back seats. For thorough cleaning, the backs of the seats and the bench are simply removable.

In most modern vehicles, you won’t need any tools to remove the back seats. You might not always want to remove the back seats. In this situation, cleaning the seats is the same as cleaning the seat folds.

Step 1
Start hovering over the back seats of your vehicle. Without using any attachments, run your hoover over them. Make sure to clean the bench it sits on, as well as the seat and the back of the seat.

Step 2
Using a crevice tool, enter the main crevices. Attach the crevice tool, and using it, push the seat sides down slowly. Remember to pay attention to the middle of the seat as well as the junction of the back and the seat’s bottom.

Step 3
After that, you can thoroughly clean your car seat by agitating any lingering dirt with an upholstery cleaner and detailing brush. Verify that you adhere to the cleaner’s instructions.

Step 4
Using a microfiber cloth, wipe the product to remove any lingering dirt after you’ve finished cleaning the area. For the last time, vacuum the area.

Conclusion

Now that you know how to clean between car seats, gather the required supplies and adhere to the instructions in this tutorial before the areas between your car seats turn into an even dirtier jungle.

This tutorial was intended to be educational, so hopefully, you found it enjoyable. To assist other car owners, it would be appreciated if you left a comment below or shared this.

Arya Wang

Leave a Reply

Your email address will not be published. Required fields are marked *.

*
*
You may use these <abbr title="HyperText Markup Language">HTML</abbr> tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>